DJI Phantom 2 Vision Quadcopter Drone
-
By: VPatnode
Added: 01-07-14
- Everyone is looking for that elusive aerial cam that's both affordable and easy to operate for the average videographer. If you have any concerns with regards to wherever and how to use helicopter camera drone, you can call us at our web-page. I'm setting out to see if the DJI Phantom Quadcopter combined with a GoPro Hero3 Black Edition is the answer, in this two-part review and workflow study.
the ‘KWID concept’ is also Z.E ready – providing a platform to receive batteries for electric use – and comes with a charging plug behind the main renault logo in the front grille. powered by a 1.2-liter turbocharged engine, the compact off-road concept is paired to dual-clutch transmission for low fuel-consumption. other tech features include electric operated front bench seat on a center rail, electric opening doors and LED lighting. the vertically-mounted TFT touchscreen display acts as the dashboard and also provides access to connected services.
The AR Drone 1.0 quadcopter (Parrot SA, Paris, France) in the described control space was chosen for the experiments because it provides strong onboard stabilization while allowing for a wide range of programmable speeds and a smooth range of motion. It is a relatively low-cost option for robust control in 3D space with extensive open source support. In addition, the AR Drone provided access to two onboard cameras, and the accelerometer, altitude, and battery data were all reported to the control software and recorded in real time. ↑ Close
If you loose control of the drone due to the signal between the radio and the drone being lost the drone will go into RTL (Return To Land) mode and return to were you took off from with the drone, thats if you had GPS lock when you took of and the drone is setup correctly, by default our drones come standard with this setting. Similarly, if you loose control of the drone due to pilot error or visibility you can also activate this feature via a switch on the radio and the drone will also come home if this feature was activated in time and the drone has not suffered a crash.
When you fly the drone for the first time you have to calibrate the compass which is quite simple. You shouldn’t need to do it again. When you are ready to fly there are four devices you have to power up and connect. The remote controller and the WiFi Extender, the drone itself and of course your smartphone. It will take a minute or so to connect them to the same WiFi network and also for the drone to connect with satellites overhead. Don’t rush this. Take the time to make sure everything is working fine and that the camera can tilt up and down. Once you get the green lights on the drone you are good to go.
-
-
Reply |
Report abuse
-
